Shengchuang Building
1 / 5
This is a water-thinnable, solventless emulsion based on a mixture of silane and siloxane. Dilute solutions serve as high-quality, general-purpose water repellents for impregnating and priming mineral surfaces. It can also be used for the mass treatment of non-load bearing concrete products.
Excellent water repellent for many absorbent mineral substrates, such as bricks, sand-lime brick, natural sandstone and mineral plasters. It is ideal for in-plant impregnation of building materials made of clay, aerated concrete, fibrous cement, mineral fibers, and lightweight aggregate.
It may also serve as a water-repellent primer for emulsion paints and plasters, silicone resin emulsion paints, and silicone resin plasters.
| Property | Result |
|---|---|
| Appearance | Milky White |
| Viscosity (cSt, 25ºC) | 10 |
| Active Content (%) | 40 |
| pH | 7.5 |
| Specific Gravity (25/25 ºC) | 0.95 |
| Centrifugation (3000rpm, 15min) | No separation |
Preparation: Tap water is suitable for preparing solutions. We recommend an active substance content of 5-10% (dilute the product in the ratio 1:5 to 1:11), depending on substrate absorbency.
Application: Apply ready-to-use solution by flooding. Two "wet on wet" coats are needed to ensure complete coverage. If it starts raining, stop treatment and cover freshly impregnated areas.
Mass Impregnation: For concrete products, a dosage between 0.1 to 1.0% of the 10% dilution is recommended relative to overall mass.
