Shengchuang Building
1 / 5
The product (Class H) is constructed by wet-applied method and bonded to the base with cement paste or cement mortar. The product adds unique activator and soaking agent to the self-adhesive. On the basis of maintaining the advantages of the traditional self-adhesive rubber, the creep property of the resin is increased, and it penetrates into the pore and capillary of concrete to form physical adsorption and mortise and tenon.
| Thickness | 1.5mm / 2.0mm |
| Length | 15m / 20m |
| Width | 1m |
| Certificate | ISO9001/14001/45001 |
Waterproofing works of basement, roof, municipal engineering, etc.
On the dry, flat and dust-free base layer, first brush the base treatment agent. After drying, remove the isolation film from the self-adhesive surface of the coil, and then bond directly with the substrate.
Plain cement slurry is evenly applied on the base. After removing the isolation film, it is directly bonded. In vertical construction, special glue can be added to increase viscosity.
Clean substrate → Moisture substrate → Locate/Snapping → Plastering cement slurry → Pave membrane → Flapping/Pulping → Airing (24-48hrs) → Acceptance.
